Internal hose
Synthetic rubber resistant to petrol and diesel fuel, extruded whole without joints, of uniform thickness. Anti-static electricity:R < 1MΩ

Covering
Anti-abrasive synthetic rubber, resistant to oils, fuels and atmospheric conditions. Anti-static electricity:R < 1MΩ

Size

5/8” 3/4” 1”

Working pressure

180bar

Lenght

50mb etc

Weight

0.59–0.93kg/m

Reinforcement
1 steel wire braid.

Working Pressure
20Bar / 290Psi

Description
Fuel hose is a problem under actual working conditions, whether it is low temperature or continuous high temperature or fluid compatibility. The hose can not adapt to high temperature or low temperature, and the life will be greatly reduced. The glue and glue inside the hose can not adapt to the corrosion of fuel oil, and the life will be greatly reduced. From the perspective of R & D, we enhance the heat and low temperature performance of hoses. And hose production process according to EN1360 and UL standards, the use of anti-static, fuel oil, high-intensity ultraviolet resistance process structure. This greatly extends the service life of fuel tubes

Operating temperature
From -40 to +100°C Prolonged operation at extreme temperatures will reduce will hoses life.

Recommended fluid
Petrol and diesel fuel dispensing lines of pressure 290 Psi

Fittings Type
1. FERRULE: No-skive Type DPF2T ; 2. Insert: DPX1XX (X: Can choose)